- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats & stoppers
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping












from €23.50*
€23.50*
Prices incl. VAT plus shipping costs
Available, delivery time: 6-10 Tage
In stock
Classic diamond-shaped deck plate made of seawater-resistant bronze with a fine matt tumbled surface. Made in Europe.
With 4 countersunk holes for the fastening screws and watertight screw-in studs to accommodate various deck eyes, sheet leads and sheet rollers (see under accessories).
The matching bronze blind screw must be ordered separately.
Screw-in deck fittings can be quickly screwed into the base plate, which is permanently mounted on the deck, without the need for tools. If the fitting is not required, only the flat mount remains on the deck. This reduces tripping hazards and is particularly suitable for areas with changing use
Art. No. | version | D (mm) | L (mm) | B (mm) | H1 (mm) | D3 (mm) | D4 (mm) | Price (unit) | Delivery time | Note list | Buy |
---|
Classic diamond-shaped deck plate made of seawater-resistant bronze with a fine matt tumbled surface. Made in Europe.
With 4 countersunk holes for the fastening screws and watertight screw-in studs to accommodate various deck eyes, sheet leads and sheet rollers (see under accessories).
The matching bronze blind screw must be ordered separately.
Screw-in deck fittings can be quickly screwed into the base plate, which is permanently mounted on the deck, without the need for tools. If the fitting is not required, only the flat mount remains on the deck. This reduces tripping hazards and is particularly suitable for areas with changing use
Description
Classic diamond-shaped deck plate made of seawater-resistant bronze with a fine matt tumbled surface. Made in Europe.
With 4 countersunk holes for the fastening screws and watertight screw-in studs to accommodate various deck eyes, sheet leads and sheet rollers (see under accessories).
The matching bronze blind screw must be ordered separately.
Screw-in deck fittings can be quickly screwed into the base plate, which is permanently mounted on the deck, without the need for tools. If the fitting is not required, only the flat mount remains on the deck. This reduces tripping hazards and is particularly suitable for areas with changing use
Accessories
Similar products
Last seen products
More articles from this category