Foldable solar module DCSolar Power Move

Side protection for SOLARA solar modules.

The FLINbags are the perfect solution for storing your solar modules safely and space-savingly. Manufactured in Europe, they feature high-quality workmanship, protective padding and a reinforced back for optimum stability. An all-round zipper ensures easy handling.The FLINbag is available in two sizes: the FLINbag little is suitable for solar modules with 50W, while the FLINbag big offers space for 100W modules. Both versions offer space for systems with up to six solar modules - ideal for safe transportation and convenient storage.

The FLINrail is the perfect solar solution for retrofitting on board. The bifacial solar module uses the front and back to capture solar energy and therefore delivers similar daily yields as two classic solar modules of the same size when mounted vertically.The system can be easily mounted on the railing wire of your yacht using the integrated clamps. Additional lines fix the module in place using snap hooks and allow it to be continuously aligned with the sun. A line runs from each corner and is hidden in the frame of the solar module. The loose ends are clipped into the foot railing or the lower railing wire using the carabiners. When the FLINrail+ is aligned, the loose lines pull themselves into the frame of the module at the push of a button and tighten. The FLINrail+ can be fixed at any angle using the four clamps in the corners.FLIN quality: The solar modules use multi-busbar technology, which offers a particularly high number of electrical contacts due to its design. This redundancy results in a significantly longer service life for the module due to the lower load on the individual conductors. In addition, the semi-flexible solar panels are extremely robust and resistant despite their low weight. The cables of the innovative FLIN solar systems are sheathed with Dyneema fibers. This offers optimum protection even under extreme conditions. To ensure a reliable power supply for the on-board electrical system, all components of FLIN products are manufactured with high precision in Europe.

Das FLINsail versorgt Sie mit eigenem Strom, wenn Sie mit Ihrer Segelyacht vor Anker oder im Hafen liegen.Das FLINsail ist ein modulares Solarsystem, das in der Mastnut wie ein Segel gehisst und geführt wird. Mit Führungsleinen aus Dyneema lassen sich die Solarmodule um die horizontale Achse in einem optimalen Winkel zur Sonne synchron ausrichten und erzielen so eine sehr hohe Effizienz, auch in den Morgen- und Abendstunden.Mit Hilfe der patentierten FLIN-Mastrutscher lässt sich das FLINsail oberhalb des Großsegels fest in die Mastnut einklicken oder auf einer T-Schiene aufsetzen, das Großsegel kann in der Mastnut bleiben. Wir liefern für ihr Mastsystem die passenden Mastrutscher. Bitte teilen Sie uns unter Bemerkungen dazu die Breite Ihrer Mastnut oder Ihrer T-Schiene mit (siehe Zeichnung bei den Bildern).Die Anzahl der Solarmodule des FLINsails ist an den Energieverbrauch Ihrer Segelyacht angepasst. Durch den modularen Aufbau sind Ausführungen mit zwei bis sechs Solarpanelen möglich. Das obere und untere Sorlarmodul ist jeweils versteift, so dass das FLINsail auch bei starkem Wind eingesetzt werden kann. Beim 2M-FLINsail light wird auf die Versteifung des Moduls verzichtet. Es ist somit preiswerter und dazu sehr leicht, für starken Wind empfehlen wir das verstärkte Moul 2M-FLINsail tough.Während des Segelns wird das FLINsail in der mitgelieferten Transporttasche gelagert. Wird das FLINsail gesetzt, lässt sich die Tasche über Gummischlaufen auf dem Großbaum befestigen, so dass sich die Solarmodule  - ähnlich wie ein Großsegel aus Lazy Bags - in den Mast ziehen lassen.Zum Laden Ihrer Bordbatterien wird zusätzlich ein Solarladeregler benötigt. Für den 12 Volt Betrieb empfehlen wir den MPPT SmartSolar Laderegler von Victron Energie mit dem sie die Ladeleistung über das Smartphone überwachen können. Die App hilft dabei die optimale Ausrichtung ihres FLINsails zu finden.

The FLINstripe uses the surface of the boom cover to generate solar energy and thus maintain the battery charge. Depending on the length of the boom, up to three FLINstripes can be connected.The solar module is attached to the boom cover or lazy bag using Velcro strips and can be used at anchor and in the harbor as well as when sailing. The Velcro straps must be sewn onto the tarboom cover by a sailmaker.For optimum energy yield, both sides of the boom cover can be fitted with FLINstripes to charge the batteries with solar power throughout the day while sailing, in the harbor and at anchor.FLIN quality: The solar modules use multi-busbar technology, which offers a particularly high number of electrical contacts due to its design. This redundancy results in a significantly longer service life for the module due to the lower load on the individual conductors. In addition, the semi-flexible solar panels are extremely robust and resistant despite their low weight. The cables of the innovative FLIN solar systems are sheathed with Dyneema fibers. This offers optimum protection even under extreme conditions. To ensure a reliable power supply for the on-board electrical system, all components of FLIN products are manufactured with high precision in Europe.Our price applies to one module, the pictures show several modules in a row. Please select a starboard or port module, depending on where you want to place the FLINstripes.

The foldable, lightweight solar cell modules ensure a high energy yield.They are integrated into a robust fabric carrying bag and are thus compactly dust-proof. Requiredcables are stowed in a practical outer pocket. Integrated eyelets andand folding struts allow the unfolded modules to be mounted or braced in a mobilemodules. For 12 volt on-board voltage.Type 90/2: 2x36 cells, including PWM charge controller, with LCD display, data logger and USB output.Dimensions L x W x H mm: unfolded 1075 x 560 x 8 mm, folded 440 x 560 x 20 mm.Type 135/3: 3x12cells optionally without charge controller or with Bluetooth-compatible MPPT charge controller.Dimensions L x W x H mm: unfolded 1525 x 560 x 10 mm, folded 440 x 560 x 20 mm.

Specially developed for use on boats:36 high-quality silicone solar cells are embedded in a saltwater-proof EVA foil on the V4A stainless steel carrier plate.The plates can be screwed or glued on, they are accessible and flexible to 3°C.The cord exit is sealed saltwater-proof and very flat, cord length 1.5 m.System voltage 12 volts (Max: 17.6 V, idle: 21 V).

Impact-resistant, etremly flat and semi-flexible solar panels - the German manufacturer SOLARA is constantly developing its proven marine high-performance solar modules. The monocrystalline cells are arranged on a high-strength aluminum sandwich carrier plate, which is semi-flexible and can be mounted on deck with up to 3 degrees of flex. The front and back sides are coated with Nowoflon film, the edges are welded watertight.These modules ensure extremely high yields even on cloudy days due to monocrystalline high-performance cells of different sizes.SOLARA manufactures the solar modules exclusively in Germany.Specifications:extremely flat, walkable and semi-flexiblestability and maximum heat dissipation through innovative aluminum sandwich carrier plateextra cells for more efficient chargingall materials withstand extreme heat, high humidity, seawater and salt waterteflon-like extremely resistant protective film on front and back sidesseawater resistant cable outlet on top, very flat screwed and glued (with strain relief and 3.0 connection cable). The cable can be routed through the carrier plate below deck right next to the cable outlet.an external hotspot protector with bypass diodes against cell overheating is included with the larger modules (200, 280, 400).a cable feed through directly through the carrier plate is already preparedreverse current carrying capacity 12 Apermissible operating temperature -40°C to +85°Cmaximum system voltage 24 V.The article 4682-320 type S320P41 is one millimeter flatter, but has slightly less yield.

Very robust and reliable solar modules, developed and manufactured for permanent use on water and on land. The modules are well suited for fixed mounting on an equipment carrier or the pilot house.SOLARA manufactures the solar modules exclusively in Germany.Specifications:36 or 45 monocrystalline PERC high-performance solar cells for for an extremely good efficiencyRobust, seawater-resistant, torsion-resistant aluminum profile frameDrainage holes in the frametempered solar glass, thickness 3.2/2.0 mmwaterproof back foilLarge, waterproof junction box, IP67 with MC4 compatible connectorRecurrent carrying capacity 12 AAllowable operating temperature -40° to +85°C.

SOLARA solar panel of the latest generation, ready wired, including charge controller FOX 062. The solar panel of the SOLARA Power Mobil series has an extremely high efficiency due to the use of SUNPOWER cells.Two solar panels are well protected in a sturdy Cordura bag. The bag is foldable in the middle, so that the module can be stored very well and can be used flexibly everywhere. The module can be used immediately without any further installation effort.SOLARA manufactures the solar modules exclusively in Germany.Specifications:Flexible to use thanks to innovative, full circumferential fabric edgingEyes, Loxx buttons, Velcro or zipper can be retrofittedSpace-saving stowable due to foldable module surfaceEffective battery charging even with diffuse lightExtremely high efficiency through the use of monocrystalline Sunpower cells with 23% efficiencyAll materials withstand extreme heat, high humidity, seawater and salt waterRugged, low-profile, seawater-tight cable outlet, bonded and boltedThe FOX 062 charge controller is includedwith 5 meter cable, at the module with Sure Seal plugwith 6 A cigarette lighter/socket adapterreverse current capacity IR 12 Apermissible operating temperature -40°C to +80°CDimensions unfolded L x W x H: 1342 x 628 x 6 mm

Rigid solar panels in a seawaterproof anodized aluminum profile frame, ideal for mounting on decks or on an equipment rack. The cells are embedded in EVA compound and well protected by a hardened protectif front glass.With a waterproof (IP65), rear-mounted junction box and a 2 m connection cable, the solar module is pre-assembled for direct connection to a charge controller.36 high-performance silicon crystalline (c-Si) cells with integrated bypass diodes ensure a high yield.Multiple modules can be connected parallel to increase power.For 12 volt battery voltage.