Go to homepage
€0.00*
Jobs
Catalogue
Quick order
3920-703 WEATHERDOCK ME SENSE Bootsüberwachung Sensor Temperatur
3920-700 WEATHERDOCK ME SENSE Bootsüberwachung
3920-704 WEATHERDOCK ME SENSE Bootsüberwachung Sensor Luftfeuchtigkeit
3920-705 WEATHERDOCK ME SENSE Bootsüberwachung Sensor Bilge
3920-707 WEATHERDOCK ME SENSE Bootsüberwachung Sensor Luftdruck
3920-708 WEATHERDOCK ME SENSE Bootsüberwachung Sensor Tür
3920-721 WEATHERDOCK ME SENSE Bootsüberwachung Sensor Landstrom

The ME SENSE sensors can be used to complement your boat monitoring set or to customise a system to suit your personal needs.

Each of the sensors (except the shore power sensor), due to their small size and weight, can be easily attached exactly where needed with a strip of double-sided tape.

General

  • Dimensions (L/W/H): 50 x 50 x 20 mm
  • Weight: 27 grams
  • Operating temperature range: -20° Celsius to +70° Celsius
  • Storage temperature range: -40° Celsius to +70° Celsius

Power supply

  • Operating voltage: 3V DC
  • Battery life: 1.5 years
  • Battery type: CR2450

Bluetooth Low Energy

  • Frequency band: 2.400 - 2.4835 GHz
  • Supported modes: Bluetooth 5.0

ME SENSE Sensor Temperature

For monitoring temperature fluctuations of the battery (e.g. during winter storage) or the temperature in the engine compartment.

ME SENSE Sensor Humidity

High humidity and poor ventilation quickly lead to mould growth. To prevent this, the ME SENSE Humidity Sensor measures at regular intervals whether the humidity is within the desired range - if not, an alarm is sent via the ME SENSE app.

ME SENSE Sensor Bilge

The exposed float detects whether there is water in the bilge. During installation, the installation height is defined so that rising water in the bilge is detected and an alarm is given above a defined height.

ME SENSE Air Pressure Sensor

Take a look at the barometer on board from a distance. This way, rapid changes in air pressure are detected and there is still time to take the necessary measures before a possible storm.

ME SENSE Sensor Door

A magnetic contact determines whether a door or sliding hatch / bulkhead is closed or open. One of the two magnets is connected to the sensor by cable. The two magnets are attached to the door to be monitored and to the door frame in such a way that they close an electric circuit at a small distance from each other when the door is closed. This circuit is interrupted when the door is opened. The changed status "open" can trigger an alarm in the app.

ME SENSE Sensor Shore Power

The ME SENSE shore power sensor is simply plugged into a 230 V socket on board and integrated into the ME SENSE app via the QR code. This makes it possible to check whether shore power is available on board or not. It is not possible to control the socket via the app. Dimensions (L/W/D): 160 x 10 x 60 mm.

Each of the sensors can be easily connected to the central ME SENSE RELAY WiFi bridge. Simply scan the QR code shown with the ME SENSE app from Weatherdock and that's it. The download of the ME SENSE App is free of charge, a subscription is required for the registration of the sensors.

To set up the ME SENSE boat monitoring system, a pre-assembled set with two or four sensors is the first choice. You will find the two variants of the "ME SENSE Set" further down on this page under "Similar products".

Data transmission is possible via the marina WiFi or additionally via the mobile phone network. You will find the ME SENSE RELAY WiFi and the GATE LTE under "ME SENSE devices" further down on this page under "Similar products".

more information

from €88.50*

€88.50*

Prices incl. VAT plus shipping costs

version
Stk

Description

The ME SENSE sensors can be used to complement your boat monitoring set or to customise a system to suit your personal needs.

Each of the sensors (except the shore power sensor), due to their small size and weight, can be easily attached exactly where needed with a strip of double-sided tape.

General

  • Dimensions (L/W/H): 50 x 50 x 20 mm
  • Weight: 27 grams
  • Operating temperature range: -20° Celsius to +70° Celsius
  • Storage temperature range: -40° Celsius to +70° Celsius

Power supply

  • Operating voltage: 3V DC
  • Battery life: 1.5 years
  • Battery type: CR2450

Bluetooth Low Energy

  • Frequency band: 2.400 - 2.4835 GHz
  • Supported modes: Bluetooth 5.0

ME SENSE Sensor Temperature

For monitoring temperature fluctuations of the battery (e.g. during winter storage) or the temperature in the engine compartment.

ME SENSE Sensor Humidity

High humidity and poor ventilation quickly lead to mould growth. To prevent this, the ME SENSE Humidity Sensor measures at regular intervals whether the humidity is within the desired range - if not, an alarm is sent via the ME SENSE app.

ME SENSE Sensor Bilge

The exposed float detects whether there is water in the bilge. During installation, the installation height is defined so that rising water in the bilge is detected and an alarm is given above a defined height.

ME SENSE Air Pressure Sensor

Take a look at the barometer on board from a distance. This way, rapid changes in air pressure are detected and there is still time to take the necessary measures before a possible storm.

ME SENSE Sensor Door

A magnetic contact determines whether a door or sliding hatch / bulkhead is closed or open. One of the two magnets is connected to the sensor by cable. The two magnets are attached to the door to be monitored and to the door frame in such a way that they close an electric circuit at a small distance from each other when the door is closed. This circuit is interrupted when the door is opened. The changed status "open" can trigger an alarm in the app.

ME SENSE Sensor Shore Power

The ME SENSE shore power sensor is simply plugged into a 230 V socket on board and integrated into the ME SENSE app via the QR code. This makes it possible to check whether shore power is available on board or not. It is not possible to control the socket via the app. Dimensions (L/W/D): 160 x 10 x 60 mm.

Each of the sensors can be easily connected to the central ME SENSE RELAY WiFi bridge. Simply scan the QR code shown with the ME SENSE app from Weatherdock and that's it. The download of the ME SENSE App is free of charge, a subscription is required for the registration of the sensors.

To set up the ME SENSE boat monitoring system, a pre-assembled set with two or four sensors is the first choice. You will find the two variants of the "ME SENSE Set" further down on this page under "Similar products".

Data transmission is possible via the marina WiFi or additionally via the mobile phone network. You will find the ME SENSE RELAY WiFi and the GATE LTE under "ME SENSE devices" further down on this page under "Similar products".

Downloads

Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
WEATHERDOCK ME SENSE Boat watch set
WEATHERDOCK ME SENSE Boat watch set
The WEATHERDOCK ME SENSE system allows you to monitor your boat, your yacht or your camper van from a distance in real time.The ME SENSE sensors record measured values at regular intervals, which are transmitted to a central communication unit, the ME SENSE RELAY. The IoT (Internet-of-Things) standard allows devices that are independent of each other to communicate with each other via the Internet using WLAN and exchange data.From the relay, the data is uploaded to a data cloud via a secure WLAN connection. The WiFi connection to the marina's WiFi network is used for this purpose. With the ME SENSE app, the data values can be displayed and monitored in real time on the smartphone or tablet. For example, the app offers the option of defining threshold values which, when reached, generate an alarm on the smartphone / tablet.The Basic Setwith ME SENSE RELAY WiFi and the ME SENSE temperature sensor represents the basic equipment for ME SENSE boat monitoring. The temperature sensor would detect a fire on board.The ME SENSE RELAY WiFi takes on a dual role. On the one hand, it serves as a control centre to transmit the temperature data via WLAN to the cloud and ultimately to the ME SENSE app. It also serves as a battery sensor. Since it is connected to the on-board battery for power supply, it also monitors its voltage.The Basic Set can be operated with the free ME SENSE app. A subscription to the app is required for additional sensors.The Advanced Setcontains the ME SENSE sensors for bilge and door in addition to the components of the Basic Set. This means you can already monitor four parameters when you are not on board. A too high water level in the bilge would be reported as well as the opening of the companionway door.The download of the ME SENSE app is free of charge, a subscription is required for the registration of the sensors. When purchasing the Advanced Set, the use of the app is free for the first year.Your ME SENSE boat monitoring system can be supplemented with additional sensors to additionally monitor air humidity, air pressure or the shore power connection. You will find "ME SENSE sensors" further down on this page under "Similar products".Data transmission is also possible via the mobile phone network if no marina WiFi is available. You will find the ME SENSE GATE LTE under "ME SENSE devices" further down this page under "Similar products".

From €284.01 *
Details
WEATHERDOCK ME SENSE Boat watch devices
WEATHERDOCK ME SENSE Boat watch devices
With the ME SENSE devices, your boat monitoring set can be supplemented or a new system can be individually put together according to personal needs.The ME SENSE RELAY WiFi is the basis of the ME SENSE boat monitoring system. It is the control centre for transmitting the data from the sensors via WLAN of the marina to the cloud and ultimately to the ME SENSE app. The relay also serves as a battery sensor. Since it is connected to the on-board battery for power supply, it also monitors its voltage.General Dimensions (L/W/H): 125 x 100 x 50 mmWeight: approx. 160 g (plus antenna)Operating temperature range: -20° Celsius to +70° CelsiusStorage temperature range: -40° Celsius to +70° CelsiusPower supplyOperating voltage: 9 - 32 volts DCPower consumption: 100 mWConnections Power supply: 2-pole supply cable, 1.5 mRP SMA socket: for WiFi antennaThe ME SENSE GATE LTE enables an "island solution". With an LTE SIM card (not included in the scope of delivery), it is possible to connect the ME SENSE RELAY WiFi in order to set up your own Internet access point. Thus, the ME SENSE boat monitoring system is independent of WLAN networks in harbours and can transmit data via the mobile network.To set up the ME SENSE boat monitoring system, a pre-assembled set with two or four sensors is the first choice. You will find the two variants of the "ME SENSE Set" further down on this page under "Similar products".Your ME SENSE boat monitoring system can be supplemented with additional sensors to additionally monitor temperature, bilge, door, air humidity, air pressure or the shore power connection. You will find "ME SENSE Sensors" further down on this page under "Similar products".

From €135.51 *
Details
WEATHERDOCK easyTRX3S AIS transponder with WiFi and MeSense
WEATHERDOCK easyTRX3S AIS transponder with WiFi and MeSense
The easyTRX3S is the further development of the easyTRX3 AIS Class B transponder with SOTDMA technology and 5 watt transmission power. WiFi and ME SENSE Relay for smart boat monitoring have been added to the transponder.With the standard WiFi module, all AIS data received via the NMEA network can be forwarded to a wirelessly connected end device such as a tablet or smartphone or to a chart plotter. Thanks to its Bluetooth functionality, the easyTRX3S can also serve as the heart of the ME SENSE yacht monitoring system. The data from up to 20 sensors and 10 actuators is transmitted to the relay via Bluetooth. From there, it is transmitted to the ME SENSE app via the marina's Wi-Fi network or your own LTE router. This allows the yacht itself to be monitored conveniently from home.SOTDMA technologyBased on AIS Class B SOTDMA (Self Organized Time Division Multiple Access) technology, the easyTRX3S transmits with higher (5 watts) transmission power and priority. The transmission slots for the next four transmissions are reserved automatically. Even in areas with high traffic volumes, the easyTRX3S is always able to transmit position reports, as SOTDMA has priority over regular AIS Class B devices with CSTDMA (Carrier Sense Time Division Multiple Access). The higher transmission rate improves the visibility of your own AIS position reports on AIS-capable systems.Integrated GPS antenna and active VHF antenna splitterThe integrated GPS antenna increases the independence of mounting the easyTRX3S device on board. On GRP and wooden yachts, only a power connection and a VHF connection are required. On steel yachts, the external GPS antenna available as an accessory improves reception. The integrated, active VHF antenna splitter ensures that the same antenna can be used for VHF radio and AIS. The preamplifier reduces the physical loss to a minimum.FeaturesInternationally certified AIS Class B transponderSOTDMA (time slot method) technology with 5 watts of radiated transmission powerFaster transmission intervals (depending on the speed of the vessel)Complies with the new international standard IEC62287-2CPA alarm & anchor alarmInternal memory for recording travel data (black box)Configuration of the device with USB power supply possibleInternal data memory can be read out with USB power supplyIntegrated WiFiIntegrated antenna splitterIntegrated GPS antennaConnections: NMEA2000, NMEA0183 and USBWater-, weather-, shock- and vibration-resistant, handy housingIoT ME SENSE yacht monitoringAlternatively available with additional LAN or DVB-T/FM radio moduleTechnical data1 channel VHF transmitter2-channel VHF receiver (AIS frequencies: 161.975 MHz and 162.025 MHz)72-channel GNSS/GPS receiverChannel sensitivity: = -112 dBmProtection class: IP67 (dust and waterproof against temporary submersion)Intended for installation below deckOperating temperature: -10°C to + 55°CNMEA output message: VDMTransmission power: 5 WOperating voltage: 9 - 32 voltsDimensions (L/W/H): 190 x 135 x 60 mmWeight: approx. 700 gScope of deliveryeasyTRX3S transpondereasyTRX3S connection cable (approx. 2 m)Connection cable easyTRX3S to VHF radiotelephone (approx. 1 m)USB connection cable (approx. 1.8 m)Quick guide (the detailed user manual can be downloaded from the internal memory)Programming software for Windows PC and Apple Mac on internal memoryWiFi antennasApprovalsApproved by BSHAIS according to IEC 62287-2:2017Environment according to IEC 60945:2002GPS according to IEC 61108-2003 and EN 301843-1:2004Product safety according to EN 60950-1 ITU-R M.1371-5

From €1,044.00 *
Details

More Products from Category Smart boat

WEATHERDOCK ME SENSE Boat watch devices
WEATHERDOCK ME SENSE Boat watch devices
With the ME SENSE devices, your boat monitoring set can be supplemented or a new system can be individually put together according to personal needs.The ME SENSE RELAY WiFi is the basis of the ME SENSE boat monitoring system. It is the control centre for transmitting the data from the sensors via WLAN of the marina to the cloud and ultimately to the ME SENSE app. The relay also serves as a battery sensor. Since it is connected to the on-board battery for power supply, it also monitors its voltage.General Dimensions (L/W/H): 125 x 100 x 50 mmWeight: approx. 160 g (plus antenna)Operating temperature range: -20° Celsius to +70° CelsiusStorage temperature range: -40° Celsius to +70° CelsiusPower supplyOperating voltage: 9 - 32 volts DCPower consumption: 100 mWConnections Power supply: 2-pole supply cable, 1.5 mRP SMA socket: for WiFi antennaThe ME SENSE GATE LTE enables an "island solution". With an LTE SIM card (not included in the scope of delivery), it is possible to connect the ME SENSE RELAY WiFi in order to set up your own Internet access point. Thus, the ME SENSE boat monitoring system is independent of WLAN networks in harbours and can transmit data via the mobile network.To set up the ME SENSE boat monitoring system, a pre-assembled set with two or four sensors is the first choice. You will find the two variants of the "ME SENSE Set" further down on this page under "Similar products".Your ME SENSE boat monitoring system can be supplemented with additional sensors to additionally monitor temperature, bilge, door, air humidity, air pressure or the shore power connection. You will find "ME SENSE Sensors" further down on this page under "Similar products".

From €135.51 *
Details
WEATHERDOCK ME SENSE Boat watch sensors
WEATHERDOCK ME SENSE Boat watch sensors
The ME SENSE sensors can be used to complement your boat monitoring set or to customise a system to suit your personal needs.Each of the sensors (except the shore power sensor), due to their small size and weight, can be easily attached exactly where needed with a strip of double-sided tape.GeneralDimensions (L/W/H): 50 x 50 x 20 mmWeight: 27 gramsOperating temperature range: -20° Celsius to +70° CelsiusStorage temperature range: -40° Celsius to +70° CelsiusPower supplyOperating voltage: 3V DCBattery life: 1.5 yearsBattery type: CR2450Bluetooth Low EnergyFrequency band: 2.400 - 2.4835 GHzSupported modes: Bluetooth 5.0ME SENSE Sensor TemperatureFor monitoring temperature fluctuations of the battery (e.g. during winter storage) or the temperature in the engine compartment.ME SENSE Sensor HumidityHigh humidity and poor ventilation quickly lead to mould growth. To prevent this, the ME SENSE Humidity Sensor measures at regular intervals whether the humidity is within the desired range - if not, an alarm is sent via the ME SENSE app.ME SENSE Sensor BilgeThe exposed float detects whether there is water in the bilge. During installation, the installation height is defined so that rising water in the bilge is detected and an alarm is given above a defined height.ME SENSE Air Pressure SensorTake a look at the barometer on board from a distance. This way, rapid changes in air pressure are detected and there is still time to take the necessary measures before a possible storm.ME SENSE Sensor DoorA magnetic contact determines whether a door or sliding hatch / bulkhead is closed or open. One of the two magnets is connected to the sensor by cable. The two magnets are attached to the door to be monitored and to the door frame in such a way that they close an electric circuit at a small distance from each other when the door is closed. This circuit is interrupted when the door is opened. The changed status "open" can trigger an alarm in the app.ME SENSE Sensor Shore PowerThe ME SENSE shore power sensor is simply plugged into a 230 V socket on board and integrated into the ME SENSE app via the QR code. This makes it possible to check whether shore power is available on board or not. It is not possible to control the socket via the app. Dimensions (L/W/D): 160 x 10 x 60 mm.Each of the sensors can be easily connected to the central ME SENSE RELAY WiFi bridge. Simply scan the QR code shown with the ME SENSE app from Weatherdock and that's it. The download of the ME SENSE App is free of charge, a subscription is required for the registration of the sensors.To set up the ME SENSE boat monitoring system, a pre-assembled set with two or four sensors is the first choice. You will find the two variants of the "ME SENSE Set" further down on this page under "Similar products".Data transmission is possible via the marina WiFi or additionally via the mobile phone network. You will find the ME SENSE RELAY WiFi and the GATE LTE under "ME SENSE devices" further down on this page under "Similar products".

From €88.50 *
Details
WEATHERDOCK ME SENSE Boat watch set
WEATHERDOCK ME SENSE Boat watch set
The WEATHERDOCK ME SENSE system allows you to monitor your boat, your yacht or your camper van from a distance in real time.The ME SENSE sensors record measured values at regular intervals, which are transmitted to a central communication unit, the ME SENSE RELAY. The IoT (Internet-of-Things) standard allows devices that are independent of each other to communicate with each other via the Internet using WLAN and exchange data.From the relay, the data is uploaded to a data cloud via a secure WLAN connection. The WiFi connection to the marina's WiFi network is used for this purpose. With the ME SENSE app, the data values can be displayed and monitored in real time on the smartphone or tablet. For example, the app offers the option of defining threshold values which, when reached, generate an alarm on the smartphone / tablet.The Basic Setwith ME SENSE RELAY WiFi and the ME SENSE temperature sensor represents the basic equipment for ME SENSE boat monitoring. The temperature sensor would detect a fire on board.The ME SENSE RELAY WiFi takes on a dual role. On the one hand, it serves as a control centre to transmit the temperature data via WLAN to the cloud and ultimately to the ME SENSE app. It also serves as a battery sensor. Since it is connected to the on-board battery for power supply, it also monitors its voltage.The Basic Set can be operated with the free ME SENSE app. A subscription to the app is required for additional sensors.The Advanced Setcontains the ME SENSE sensors for bilge and door in addition to the components of the Basic Set. This means you can already monitor four parameters when you are not on board. A too high water level in the bilge would be reported as well as the opening of the companionway door.The download of the ME SENSE app is free of charge, a subscription is required for the registration of the sensors. When purchasing the Advanced Set, the use of the app is free for the first year.Your ME SENSE boat monitoring system can be supplemented with additional sensors to additionally monitor air humidity, air pressure or the shore power connection. You will find "ME SENSE sensors" further down on this page under "Similar products".Data transmission is also possible via the mobile phone network if no marina WiFi is available. You will find the ME SENSE GATE LTE under "ME SENSE devices" further down this page under "Similar products".

From €284.01 *
Details

Last seen products