Ship's name bell
3993*01 Schiffsglocke mit BSH-Zulassung Maßzeichnung
Ship's name bell
from €599.00*
€7.90*
Prices incl. VAT plus shipping costs
BSH approval. Hand-cast brass bell with moulded lettering (e.g. ship's name) in raised letters.
Font: Helvetica in capital letters. The letters are approx. 15 mm high and protrude approx. 3 mm. The text is set in such a way that it can be read in full when looking at the bell. You will receive a design proposal for approval. Only then will the bell be cast as an individual item. Delivery time: approx. four weeks.
As the bell cannot be turned in the area of the letters, this strip remains raw in the surface. The rest of the bell body is polished by hand. Irregularities in the lettering are unavoidable with this traditional production method (and therefore no reason for complaint). The clapper is made of grey cast iron.
The price for the letters is added to the basic price of the bell according to the bell size and number of letters.
When ordering, please specify the exact text you require under ‘Comments’.
The bell is type-tested. The DHI certificate can be found under ‘Downloads’. The DHI stamp can be stamped into the spigot on request.
Equipment requirement according to KVR/COLREG:
- All ships over 20 metres in length (ship class I, II, III) must carry a bell with a diameter of at least 300 mm.
- Ships under 20 metres in length (ship class IV) are not required to be equipped in accordance with KVR/COLREG: We recommend a bell with a diameter of 200 mm.
BSH approval. Hand-cast brass bell with moulded lettering (e.g. ship's name) in raised letters.
Font: Helvetica in capital letters. The letters are approx. 15 mm high and protrude approx. 3 mm. The text is set in such a way that it can be read in full when looking at the bell. You will receive a design proposal for approval. Only then will the bell be cast as an individual item. Delivery time: approx. four weeks.
As the bell cannot be turned in the area of the letters, this strip remains raw in the surface. The rest of the bell body is polished by hand. Irregularities in the lettering are unavoidable with this traditional production method (and therefore no reason for complaint). The clapper is made of grey cast iron.
The price for the letters is added to the basic price of the bell according to the bell size and number of letters.
When ordering, please specify the exact text you require under ‘Comments’.
The bell is type-tested. The DHI certificate can be found under ‘Downloads’. The DHI stamp can be stamped into the spigot on request.
Equipment requirement according to KVR/COLREG:
- All ships over 20 metres in length (ship class I, II, III) must carry a bell with a diameter of at least 300 mm.
- Ships under 20 metres in length (ship class IV) are not required to be equipped in accordance with KVR/COLREG: We recommend a bell with a diameter of 200 mm.
Similar products
More articles from this category
