Spring clip for door hook

Angle striking plate for heavy locks

Angle striking plate made of brass for heavy ship's locks.Available with polished or chromed surface.

From €22.00 *

Details

Cover cap for profile cylinder

Suitable for our door plates for heavy locks with a four cornered shaft of 9 mm. Brass polished or chromed.

From €25.00 *

Details

Door hook

Ratchet brace that matches ship locks (Type 4070-...). These have a special opening for hooking a racket brace in the cuff, so that one can secure the cabin door in a slightly open position for ventilation.Length 135 mm.Available polished, chromed or matt chromed. A spring clip to hold the hook in place when the door is closed can be ordered separately.

From €56.00 *

Details

Door plate for heavy locks profile cylinder

Oval door plate for our ship locks with a four cornered shaft of 9 mm. Made of brass, with polished or chromed surface.

From €29.90 *

Details

Door plate for heavy ship locks

Profile cylinder key plate for yacht- and heavy ship locks.

From €16.51 *

Details

Handles for heavy locks

Pair of handles for ships locks with a four cornered shaft of 9 mm. Straight, thin design, made of brass, available die cast and handpolished or chromed. Deliverable for mortise or box locks.

From €62.00 *

Details

Heavy mortise lock

Heavy mortise ship lock only with catch (but no key no locking function). It is made entirely of brass (with stainless steel springs), all visible surfaces are polished.Locknut: 9 mm.Backset: 55 mm.A striking plate must be ordered separately. To select the right lock typ, please see our PDF below.

From €98.00 *

Details

Heavy mortise lock round facing plate

Heavy mortise ship lock according to DIN 81301 A with triple latch, made entirely of brass (with stainless steel springs), for interior or exterior use. All visible surfaces are polished or chromed.This lock has four tumblers and comes with two keys.Locknut: 9 mm.Backset: 55 mm.Distance: 75 mm.The round facing plate is furnished with a ratcheting hole for a racket brace (must be ordered separately), so that the door can be secured in a lightly open position for ventilation. A striking plate must be ordered separately. To select the right lock typ, please see our PDF below.

From €119.00 *

Details

Heavy mortise lock round for profile cylinder

Heavy ship mortise lock according to DIN 8101 A for interior and exterior doors, made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed.This lock has four tumblers and is prepared for a profile cylinder lock. Locknut: 9 mm.Backset: 55 mm.Distance: 75 mm.The round facing plate is furnished with a ratcheting hole for a racket brace (must be ordered separately), so that the door can be secured in a lightly open position for ventilation.A Striking box or plate and a cylinder must be ordered separately.To select the right lock typ, please see our PDF below.

From €95.00 *

Details

Heavy mortise lock straight facing plate

Heavy ship mortise lock according to DIN 8101 A for interior and exterior doors, made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed.This lock has four tumblers and it comes with two keys. Locknut: 9 mm.Backset: 55 mm.Distance: 75 mm.The straight face plate is furnished with a ratcheting hole for a racket brace (must be ordered separately), so that the door can be secured in a lightly open position for ventilation.A striking box must be ordered separately.To select the right lock typ, please see our PDF below.

From €114.00 *

Details

Heavy mortise lock straight for profile cylinder

Heavy ship mortise lock according to DIN 81301 B for interior and exterior doors, made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed.This lock has four tumblers and is prepared for a profile cylinder lock. Locknut: 9 mm.Backset: 55 mm.Distance: 75 mm.The straight facing plate is furnished with a ratcheting hole for a racket brace (must be ordered separately), so that the door can be secured in a lightly open position for ventilation.A Striking box or plate and a cylinder must be ordered separately.To select the right lock typ, please see our PDF below.

From €95.00 *

Details

Heavy mortise ship lock

Heavy mortise dead ship lock (only with locking function). It is made entirely of brass (with stainless steel springs), all visible surfaces are polished.Backset: 55 mm.Comes with two Buntbart keys. A striking box must be ordered separately. To select the right lock typ, please see our PDF below.

€69.00 *

Details

Heavy mortise ship lock for profile cylinder

Heavy mortise dead ship lock (only with locking function) fpr profile cylinders. It is made entirely of brass (with stainless steel springs), all visible surfaces are polished.Backset: 55 mm. A striking plate and cylinder must be ordered separately. To select the right lock typ, please see our PDF below.

€89.00 *

Details

Heavy rim dead ship lock

Heavy dead ship rim lock according to DIN 81308 A only with locking function. It is made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed.Backset: 55 mm.Comes with two Buntbart keys. A striking box must be ordered separately. To select the right lock typ, please see our PDF below.

From €99.00 *

Details

Heavy rim dead ship lock for profile cylinder

Heavy dead ship rim lock according to gem. DIN 81308 B only with locking function prepared for a profile cylinder. It is made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed.Backset: 55 mm.A striking box and a profile cylinder must be ordered separately. To select the right lock typ, please see our PDF below.

From €83.00 *

Details

Heavy rim lock catch ship lock

Heavy rim ship lock only with catch (but no key no locking function). It is made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed. Locknut: 9 mm. Backset: 55 mm. These locks can be used outwards or inwards by adjusting the catch. A striking plate must be ordered separately. To select the right lock typ, please see our PDF below.

From €125.00 *

Details

Heavy rim ship lock

Heavy ship rim lock suitable for interior and exterior doors according to DIN 81307 A. Made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed.This lock has four tumblers and it comes with two keys.Locknut: 9 mm.Backset: 55 mm.Distance: 75 mm.A Striking box must be ordered separately.To select the right lock typ, please see our PDF below.

From €147.00 *

Details

Heavy rim ship lock for profile cylinder

Heavy ship rim lock according to DIN 81307 B prepared for a profile cylinder, suitable for interior and exterior doors. Made entirely of brass (with stainless steel springs), all visible surfaces are polished or chromed.This lock has four tumblers.Locknut: 9 mm.Backset: 55 mm.Distance: 75 mm.A Striking box and a profile cylinder must be ordered separately.To select the right lock typ, please see our PDF below.

From €149.00 *

Details

Key plate for yacht and heavy ship locks

Key plate matching our yacht and heavy ship locks

From €16.01 *

Details

Knob-knob handle for heavy mortise locks

Knob/knob handle for ship locks with a four cornered shaft of 9 mm. Attractive solid brass handle, die-cast and hand polished. Oval handles.

From €70.50 *

Details

Knob/ring handle for heavy mortise locks

Knob/ring handle for ships locks with a four cornered shaft of 9 mm. Attractive solid handle of brass, die cast and hand polished.

From €82.50 *

Details

Long door plate for heavy locks Buntbart

Oval door plat ship locks with a four cornered shaft of 9 mm. Made of brass, with polished or chromed surface.

From €29.00 *

Details

Long door plate for heavy locks profile cylinder

Long door plate for our ship locks with a four cornered shaft of 9 mm. Made of brass, with polished or chromed surface.

From €29.00 *

Details

Oval door plate for heavy locks buntbart

Oval door plate for our ship locks with a four cornered shaft of 9 mm. Made of brass, with polished or chromed surface.

From €29.90 *

Details

Rose door plate for ship lock

Round door plate for yacht locks (especially for catch lochs wihtout locking function) with a square shaft of 9 mm.Made of brass, deliverable with polished or chromed surface.

From €19.90 *

Details

Sabre hanlde for heavy locks

Handle for ship locks with a four cornered shaft of 9 mm. Attractive brass fitting, die-cast and hand polished. For mortise or box locks, as well as for doors of various depths. Polished or chromed finish.

From €72.49 *

Details

Small oval key plate for ship lock

Small oval key plate for ship locks made of brass. Deliverable with polished or chromed surface.

From €14.90 *

Details

Small oval plate for heavy rim locks with catch

Small oval plate for ship locks with catch. Fits to our ship locks with a cornered shaft of 9 mm. Made or brass, deliverable with polished or chromed surface.

From €32.00 *

Details

Spring clip for door hook

Spring-loaded cleat for ratchet brace Art-Nr. 4508-135.Polished, chromed or matt chromed brass.

From €10.90 *

Details