Skip to main content


Self-priming impeller pump with free shaft end. for socket mounting. Equipped with neoprene impeller for use as sea or fresh water pump.

The pump housing is made of bronze, the axle with ball bearings is made of stainless steel

The details regarding the output refer to an input speed 1500 U/min and back pressure at 0.3 bar.

Accessories

JABSCO Impeller
Original JABSCO impeller for installation on most cooling water bilge pumps and universal pumps.To keep motors and pumps running smoothly, choosing the right impeller is critical. In addition to the hub mount and size, the material of the impeller should match its application:Neoprene is the most commonly used material for impellers and is suitable wherever only small amounts of oil or diesel fuel are present. Neoprene impellers are therefore suitable for engine cooling and for salt or fresh water pumping.Nitrile is oil resistant and can also be used for heavily polluted water. Impellers made of nitrile are therefore suitable for bilge and bilge pumps.The impellers are usually supplied with a matching paper cover gasket.Other JABSCO impellers and spare parts are also available at short notice on request.To see the matching image for the impeller, simply click on the part number in the table below.

From €37.00 *
Tool for removing impellers JABSCO
An exceptionally practical tool for removing impellers without damaging the pump housing.Body and jaws of aluminum, shaft of stainless steel.Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.

From €99.00 *
Grease for impellers JABSCO
Accessory for JABSCO impellers: JABSCO impeller grease, 2,5 ml tube.

€2.50 *
Brass check valve
Brass check valve, spring operated.To be fitted in the tube to prevent reflux of water.With inner threads on both sides. Strong body of brass, valve cage of nylon, spring of A2 stainless steel, seal of nitrile rubber.The valve works in any installation situation.

From €10.90 *
Brass pipe-to-hose fitting
Brass hose - to - pipe fitting with external threads and hexagonal wrench attachment points. Available for various hose diameters.

From €3.20 *
Bronze pipe-to-hose fitting
Seawater-proof bronze hose pipes, with outer threads and hexagonal wrench attachment points. Available for various hose diameters.

From €7.65 *
Brass pipe-to-hose fitting 45° with external thread
45° elbow hose nozzle made of brass, with external thread and attachment for screwing in. For various hose diameters.

From €10.30 *
Multiflex hose PVC
Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *
Transparent multiflex hose PVC
Transparent, thick-walled hose made of flexible PVC with inserted steel spiral for use as a suction or pressure hose. Well suited for bilge pumps and bilge and grey water systems.Limited resistance to oil and grease (may harden).

From €3.95 *

Similar products

VETUS waterlock / exhaust silencer WLOCK
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer in a z design of the type WLOCK for standing or hanging mounting, with twistable inlet for many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below). Various additional designs are available upon request.

From €169.00 *
Exhaust Pipe
A very flexible exhaust pipe with a Lloyds certificate.Due to the special rubber quality and the tightly coiled internal helix it is possible to install the tubing even in tight quarters.The possible bending radius is only one and a half times the diameter.The temperature stability is between -30° C and +100° C with the possibility of short peaks of +115° C.Only available in tranches of 1 whole metre lengths. Depending on the procurement possibility, we supply VETUS exhaust hoses or a qualitatively equivalent alternative from European production.Additional sizes are available upon request.

From €48.50 *
Siphonbreak vent
Loop valve. Nickel-plated brass.For installation in outlet toilet or pump tubing or in water cooled engine exhaust (does not work on the inlet side).Prevention against the siphon effect in tubes and pipes.Opens under vacuum pressure.Sensing function through a rubber valve ball.Easy cleaning through top screw.The picture shows a possible installtion. Tubing, elbows and hose nipples are not included and must be ordered separately, if required.

€21.00 *
VETUS AIRVENT anti syphon
Anti syphon for motor cooling water outlet or for toilet outlet. Can be connected to hoses with internal diameters of 13, 19, 25 and 32 mm. AIRVENT H without valve, comes with 4,0 m plastic hose diameter 8 mm. AIRVENT V with spring loaded valve.

From €115.00 *
VETUS Gooseneck for exhaust systems WLOCKLT
Gooseneck for exhaust hose. Raises the exhaust hose above the waterline so that water cannot backfill the exhaust system.

From €147.50 *
VETUS exhaust flange stainless steel
Transom exhaust connection, with integrated check valve TYP TRCSV. High quality stainless steel AISI 316 with high gloss polished cover to conceal fixings. The flanges are fitted from the outside and do not need a lock bush from the inside. The exhaust hose can be fitted directly to this transom connection.

From €110.00 *
VETUS waterlock / exhaust silencer NLPH
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer of the horizontal type NLPH with slim and twistable muffler with twistable connectors for many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below). Various additional designs are available upon request.

From €238.00 *
Cooling water strainer VETUS Typ FTR 330
Proven VETUS FTR 300 cooling water filter in all-plastic design.The transparent cover is ideal for constant monitoring and quick inspection of the degree of contamination.The large, active surface is easy to clean.The optional lid spanner can be used to open the cross lid more easily. You can find this, as well as replacement filter elements, O-rings or replacement lids, further down on this page under "Accessories".

From €107.50 *
Sea water strainer nickel plated brass 1162 poly-lid
Heavy seawater filter Type 1162 of nickel-plated brass. The filter cartridge is made of V4A stainless steel.The top covers of transparent polycarbonate and O-Ring seals allow easy inspection and control of the filter.Intake and outlet on the sides.Other options are available.Approved by RINA.

From €139.90 *

Last seen products