Seam sander TDS

from €49.00*

€16.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 - 0 Tage

In stock

description

for seams 5-22 mm

15 strips of sandpaper

grain

Set

Patented professional hand tool with which the lateral flanks of deck joints can be sanded quickly and effectively or, in the case of a restoration, the remnants of old joint compound are sanded off to create a clean new adhesive surface in the joint. The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and that sanding is done exactly at a 90° angle. Supplied complete with 15 strips of sandpaper (60 grit).

more information

Show 2 articles

📖 View article in the TOPLICHT catalogue

Art. No.	description	grain	Unit price	Delivery time	Note list	Buy

Downloads

Questions about the product?

Similar products

TDS Marine Deck Caulkling Sealant

TEACKDECKING SYSTEMS deck caulk SIS440 was developed by professional teak deck installers over 30 years ago. The 1-component, air-moisture hardening silane-based deck joint compound is very well suited for deck joints of 3-10 mm width.The TEAKDECKING SYSTEMS deck caulk runs very well during application and does not shrink during hardening. When hardened, it is easy to sand, extremely flexible and highly resistant to UV light. A primer is not recommended for teak deck caulking. However, the joints must be well sanded and cleaned with acetone. An inlay masking tape is recommended to prevent 3-flank adhesion.Properties:Color: black,Film forming time: 20 - 40 minutes,Elongation at break: 850 %,Shore A hardness: 38-40°,Tensile Strength: 2.0 mm².Please observe the processing instructions on the data sheets.Important! When using the cartridge, first cut the tip at an angle. Then insert a suitable pointed object (e.g. a nail or screwdriver) into the spout and pierce the foil seal generously.

From €26.90 *

Details

TDS deck joint applicator

Practical applicator developed by teak deck specialists TDS for the precise filling of deck joints. The caulking aid can be screwed onto standard cartridge nozzles using a self-tapping plastic internal thread. Approx. 10-15 mm of the tip of the cartridge nozzle must be cut off beforehand. The skid-shaped nozzle on the wide underside is inserted into the joint and enables more controlled guidance when applying the joint sealant, saves material and limits the amount of sanding required later. Thanks to its rounded tip, the applicator enables a perfectly rounded joint. With sealing cap. After use, the applicator should be cleaned with a cloth and acetone and then closed with its cap.The white cartridge spout shown is not included. Available for 4, 5 and 6 mm joints. The corresponding width is labelled on the adapter.

From €19.90 *

Details

TDS deck fix (100pcs)

Professional deck fix for the installation of bar decks, developed by teak deck specialists TDS. Simplifies the uniform adjustment of the joint width. The spacers have a drilled hole and can be fixed directly in the joint with a wood screw (not included) to prevent slipping.Available in packs of 100, each for 4, 5 and 6 mm joints.

From €63.00 *

Details

Reefing hook TDS

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.

€54.90 *

Details

TESA seam covering tape

Special tape for attaching to the surface of the seam bottom to hinder three-edge adhesion. Rolls of 50 m.

From €5.70 *

Details

Acetone

Cleans tools, paint brushes and other working material. Effective for metal cleaning, epoxies, polyester resin and fiberglass. Can be used as thinner for many products. Degreases sanded surfaces.

€8.90 *

Details

Last seen products